•Warp guides are thin metal plates drilled with a hollow in their lower end through which a warp end may be threaded if required, they are held together at their upper end in a metal lead and are spaced in it to the cam gauge as the m/c
•The leads in turn are attached to a guide bar so that the guides hang down from it with each one occupying a position at least midway between two adjacent needles in this position. The warp thread can not be received by the needles and it will merely produce a straight vertical float.
The needles only receive the warp thread in their hooks if the guide bar overlaps across their hook or across the side remote from their hooks when the guide bar underlaps.
কোন মন্তব্য নেই:
একটি মন্তব্য পোস্ট করুন